GEARDOLUOLA

Alezi kirjoitti:Tota mietin vähän että miltä tehtaalta on vehkeet tulleet

The development of the C7 paralleled that of the M16A2 by Colt. A Canadian Forces Liaison Officer worked with the Marines in the M16A1 Product Improvement Program and relayed information to Canada's Rifle Replacement Program Office. The C7 is much like earlier M16A1E1s, rather than final product M16A2s. The earliest C7s were manufactured by Colt for Canadian Forces as the Colt Model 715. The C7 series of firearms is driven by the same direct impingement gas system as the M16 series. Like the M16A1, the C7has both semi-automatic and fully automatic fire modes. The C7 also features the structural strengthening, improved handguards, and longer stock developed for the M16A2. Diemaco changed the trapdoor in the buttstock to make for easier access, and a half-inch spacer is available to adjust stock length. The most noticeable external difference between American M16A2s and Diemaco C7s is the retention of the A1 style rear sights. Not so apparent is Diemaco's use of hammer-forged barrels. The Canadians originally wished to use a heavy barrel profile instead of the M16A2 profile, but Colt denied permission. Also, Diemaco has developed a different mounting system from Colt for the M203 grenade launcher for the C7 rifle family.

The Canadians originally wished to use a heavy barrel profile instead of the M16A2 profile, but Colt denied permission.

Mike kirjoitti: Täällä kun on pulpahdellut noita B20-settejä niin tuli mieleen että korrektein "arska" siihen saattaisi olla C7 kaiverruksilla oleva runko ylläolevien speksien mukaan ja normikiinnitteinen M203 kun nuo vuodet eivät ole niin kaukana toisitaan... täytyisi plärätä "Scud Hunter" kuvat uudestaan.